Dual Transceiver All-Outdoor Licensed Microwave Gigabit Radio
DMR-X-DT is a dual-transceiver all outdoor, IP radio operating from 6GHz to 42GHz, modulations to 4096QAM, and ultra-wide bandwidth operation to 112MHz ETSI and 160MHz ANSI. DMR-X- DT can achieve capacities up to 5.5Gbps per radio without compression.
Each DMR-X-DT transceiver supports dual sub-carriers resulting in up to four sub-carriers per dual transceiver radio to increase capacity without requiring any additional equipment.
DMR-X-DT also includes XPIC and MIMO frequency re-use technologies to double and quadruple capacity using a single licensed channel. XPIC and 2+0 operation are supported using just a single radio.
DMR-X-DT is easily and inexpensively field convertible to different sub-bands via user friendly customer replaceable diplexers. Sparing only needs to include the base radio resulting in no longer a need to spare radios in specific sub-bands.
DMR-X-DT is an ideal, highly integrated all-outdoor radio for the most demanding applications.
Performance
- Up to 5Gbps per radio using quad sub-carriers without compression
- Dual transceivers with each transceiver supporting single carrier or dual sub-carrier operation to efficiently increase capacity without adding any more equipment.
- QPSK to 4096QAM
- Ultra wide bandwidth operation to 160MHz ANSI and 112MHz ETSI
- 2x (1+0), 1+1 HSB, 2+0, 2+2 HSB, and 4+0
operation
- XPIC supported using a single dual transceiver radio
- LOS 4×4 MIMO to quadruple capacity and 2×2 MIMO to double capacity using only a single license
- Space Diversity and Frequency Diversity available
- Built-in Advanced Digital Pre-Distortion to drive higher transmission performance
- Customer replaceable diplexers to ease operational logistics and improve system flexibility
- Built-in OMT or coupler to combine carriers from each transceiver
- Different frequencies supported in single dual carrier radio (e.g. 6GHz and 11GHz)
- Adaptable antenna interface supports third party antennas to ease migration and upgrade
- Header and payload compression to further increase capacity
- 2 x 10GbE Ethernet interfaces (optional)
- 2 x CPRI interfaces (optional)
- SyncE and IEEE1588v2
- AES256 encryption
- No-touch WiFi maintenance interface (optional)
- GPS antenna (optional)
- Time based feature licensing available
Applications
Whatever your business or the goals for your network infrastructure, DMR-X-DTcan play a critical role in backhaul performance, reliability, and security.
- 4G/5G backhaul
- Fiber extension
- Fiber backup
- Leased line replacement
- Small cell backhaul
- Campus connectivity
Disaster recovery
DMR-X-DT DUAL TRANSCEIVER
System Features
| Features | |
| Data Throughput Rate | Up to 5.5Gbps per radio using quad sub-carriers or 3Gbps per radio using two carriers without compression |
| Configurations | 2 x (1+0), 2+0 ACAP/ACCP, 4+0 ACAP/ACCP, 1+1, 2+2, 2+0 XPIC, 2 x (2+0) XPIC, 2×2
MIMO, 4×4 MIMO, 1+0 SD, 2+0 SD, 1+0 FD |
| Frequency Range | 6-42GHz |
| Modulation | QPSK to 4096QAM |
| Air Interface | Full Duplex FDD |
| Channel Bandwidths per Carrier | 10-160MHz ANSI and 7-112MHz ETSI |
| Diplexer | Customer replaceable |
| Frequency flexibility | Different frequencies supported in single dual carrier radio (e.g. 6GHz and 11GHz) |
| Tx Power (diplexer output) | Up to 27dBm with Built-In Advanced Digital Pre-Distortion |
| Interfaces | |
| Ethernet | 1 x 1/2.5G RJ45 (POE), 3 x 1/2.5G SFP
or 1 x 1/2.5G RJ45 (POE), 1 x 1/2.5G SFP, 2 x 1/10G SFP+ |
| CPRI | 2 x CPRI (Modes 2, 3, and 4 – 1228.8Mbps, 2457.6Mbps, and 3072.0Mbps) |
| Console | • USB serial port
• WiFi for no-touch maintenance (optional) |
| Ethernet | |
| Max Packet Size | 16000 bytes (Jumbo Frame) |
| Ethernet Timing and Synchronization | SyncE (G.8261), IEEE 1588V2 Transparent, Boundary, and Ordinary Clock support |
| Ethernet Features | • IPv6, IPv4
• L2- 16K MAC Addresses • 4096 VLAN (IEEE 802.1Q) with 1024 VLANs supported concurrently • VLAN tag translation on ingress or egress • Provider Bridging (IEEE 802.1ad, Q-in-Q) • RSTP / MSTP • Radio Link Aggregation |
| Ethernet Compression | Interface Gap and Pre-Amble Suppression, Header Compression, Payload Compression |
| QoS Packet Classification | • DiffServ (RFC 2475)
• VLAN PRI (IEEE 802.1Q-2003) • MAC PRI • Port Priority • Port Number, Protocol • MPLS PRI |
| QoS Packet Scheduling | • Port – Weighted Round Robin (WRR)
• Logic Port (cluster) – Weighted Fair Queuing (WFQ) or Strict Priority (SP) • Priority Queue – WFQ, Strict Priority • 8 priority queues per logical port/queue |
| QoS Congestion Avoidance | Two-rate / three color marking, WRED, Policing, Flow-Control (PAUSE packets, back-pressure) |
| QoS Traffic Shaping | Configurable |
| Protection | ITU-T G.8032 Ring |
| Encryption | AES256 |
| OAM | ITU-T Y.1731, IEEE 802.1ag, 802.3ah, Radius, Syslog |
| MEF Compliance | MEF9 Services Test Suite, MEF14 Traffic Management Test Suite |
| GPS | Geo-location and advanced timing (optional) |
| Mechanical and Environmental | |
| Input Power Requirements | -48 VDC direct DC or PoE (-36 VDC to -60 VDC range) |
| Weight | 9.2kg (20.3lbs) including internal OMT or coupler (2+0 configuration) |
| Size | 23.9cm x 23.2cm x 12.5cm (9.42”x9.12”x4.94”) not including antenna nose or handle |
| Operating Temperature | -33oC to +55oC (-27oF to +131oF) per ETS 300 019-2-4 Class 4M5 |
| Humidity | 5%-100% |
| Weather | IP67 / All Weather |
| Safety | IEC 60950-1, -22 |
| Regulatory | US FCC Part 101, FCC Part 15B; ETSI EN 302 217 |
Reviews
There are no reviews yet.